To view the user guide included in the Crusher™ Wireless packaging, click here.

WALKTHROUGH

CONTROLS

Power On/Off: 

Power on: 

1. Hold main function button down for 3 seconds 
2. LED will flash purple to indicate powering on 
3. LED blinking blue indicates device is paired 
4. LED blinking red indicates device is not paired 

Power Off: 

• Hold main function button down for 3 seconds

Volume Up & Down: 

• Tap “+” or “-” buttons to turn volume up or down 

Change Audio Tracks: 

• Press and hold “+” to skip forward and “-” to skip back 

Take a phone call: 

• Answer/End call: Click main function button 
• Hold call: Press and hold main function button for 2 seconds 

Adjust the Bass: 

• Adjust slider up for more bass and down for less 

USER GUIDE

TROUBLESHOOTING

HEADPHONES WILL NOT CHARGE

Issue: Not seeing the red LED light on Crusher™ that indicates headphones are charging. 

• Wait momentarily after plugging the headphones in, occasionally it takes a few seconds to begin charging. 
• Check to see if any debris is inside or otherwise blocking the charging port on the side of the headphones. 
• Be sure to charge your headphones on a flat surface to ensure the USB connector on the charging cord is flush and securely inserted into the charging port. 
• When charging the device, we recommend using a cable, charger, or outlet with a power output that does not exceed 18-Watt (5 Volts/3.6amps). 

If you’ve checked everything above and are still experiencing issues, please visit our warranty page where you can file a claim to receive a replacement. All Skullcandy products have a 1-year warranty. 

FAQs

WARRANTY

Does Crusher™ Wireless have a warranty?
Yep! 1 year. For more information, click here.